Digikeijs DR5013 Digireverse – Ultimate reverse loop nodule

The DR5013 operates either with sensor tracks (short-circuit-free) or via “short-circuit detec3on” to switch over the reversing loop. The polarity of the reversing
loop can also be changed via a switch command. The busy signal of the sec3ons (T, S1, S2) can be done via LocoNet® or external output (for GND or CS feedback).
A short-circuit message can be output via LocoNet or via the SHORT output of the module. An integrated Railcom® detector for address evalua3on and
POM reading is also included. An electronic high-speed MOSFET relay with 3 ampere load capacity for switching over ensures absolutely trouble-free and wearfree
reversing of polarity of the reversing loop. There is also a USB port for configura3on and firmware updates.

DR5013 EN manual: