TAMS Mini timer MT3

Mintimer MT -3 ” pulse delay ” . Maximum delay time 60 seconds. Delay time set by a trim pot . For use in analog and digital systems. Kit for DIY soldering.

The circuit is controlled by an IC which stores the timing of voltage changes at the input of the block and with the set time delay between 0 and 60 seconds, ” passes ” the output. The time between two voltage changes at the input of the block can be any length. The IC can store up to seven voltage change during the set delay time.

Examples of use: Delayed triggering of solenoids (shape signals, switches , bistable relay) , delayed power off in a track section after passing over a reed contact to enter the contact free again.

Max current at output : 1.000 mA

Supply voltage : 16 – 18V DC or Wechselpannung

Board dimensions : approx 48 x 52 mm

Manual: http://www.tams-online.de/htmls/produkte/mt3/MT_DE_2011_12.pdf