ZIMO ADAPLU – PLUX22 adaptor board with 1,5V outputs

Adapter board for PluX22 decoder; the decoder is plugged into the female connector of the adapter. Using Large solder pads, the wiring inside the locomotive can be easily carried out, the common wire used for a variety of connections (with +ve lines) are present multiple times. The adapter board ADAPLU is equipped with a rectifier that relieves the rectifier of the decoder, so less heat is generated and there is more power.
The adapter board ADAPLU can be used with several PluX decoders from the current ZIMO program, namely MX645P22, MX633P22 … and successor types; any type that is equipped with 16 V energy storage socket.
NOT PERMITTED the use of ADAPLU together with PluX16 decoders !
The versions of the adapter board ADAPLU15 and ADAPLU50 include voltage regulators for a low voltage function of 1.5 V or 5V, respectively. The 5 V voltage can, for example, be used to operate servos (control lines for 2 servos are present on ZIMO decoders for some time).