Viessmann 4558 – Marklin & Trix C track digital point motor

This special point motor is a powerful and quiet unit with integrated decoder. Usable for Märklin and Trix C track system turnouts. Decoder is mounted as component inside the cable so the drive is very compact. Extraordinary and very realistic slow movement of the point rails. Speed and motion are controlled by the built-in electronics which warrants a very sensitive adjustment. If – due to the characteristics of your turnout – the direction of the turnout doesn`t fit with the switching direction of the digital command station, it is possible to set the drive motor to reverse mode. The associated decoder is suitable for DC/AC, MM and DCC and is able to send the requested position or the actual position by RailCom to corresponding digital command stations, e. g. Viessmann Commander item-No. 5300. Analogue mode is possible, too. Additional switching outputs for a conventional feedback and core polarization complete the functions. Functions are configurable. This special point drive is only suitable for Märklin/Trix C track system turnouts. The drive can be installed in the following Märklin-C turnouts (turnouts with track bed): – 24611 left turnout 188,3 mm / R2 = 437,5 mm / 24,3°. Manual. – 24612 right turnout 188,3 mm / R2 = 437,5 mm / 24,3°. Manual. – 24624 double slip switch 188,3 mm / 24,3°. With electric mechanism and lighted double slip switch lantern – 24630 three way turnout (2.pieces drives) length 188,3 mm/2 x 24,3° – 20671 left curved turnout with a manual hand lever. Inner curve: R1 = 360 mm / 30°. Outer curve: 30° with the parallel curve spacing of 77,5 mm. – 20672 right curved turnout with a manual hand lever. Inner curve: R1 = 360 mm / 30°. Outer curve: 30° with the parallel curve spacing of 77,5 mm. – 24671 left curved turnout. Inner curve: R1 = 360 mm / 30°. Outer curve: 30° with the parallel curve spacing of 77,5 mm. Manual hand lever included. – 24672 right curved turnout. Inner curve: R1 = 360 mm / 30°. Outer curve: 30° with the parallel curve spacing of 77,5 mm. Manual hand lever included.24711 left hand wide radius turnout. Length 236,1 mm. Branch track radius 1114,6 mm. Turnout curve 12,1°. 10° metal frog. – 24712 right hand wide radius turnout. Length 236,1 mm. Branch track radius 1114,6 mm. Turnout curve 12,1°. 10° metal frog. The drive can be installen in the following Trix C turnouts (turnouts with track bed): – 62611 left turnout 188,3 mm, R2 = 437,5 mm, 24,3° Manual hand lever included. – 62612 right turnout 188,3 mm, R2 = 437,5 mm, 24,3° Manual hand lever included. – 62624 double slip switch 188,3 mm, 24,3° with drive – 62671 left curved turnout R1=360 mm, 30° Manual hand lever included. – 62672 right curved turnout R1=360 mm, 30° Manual hand lever included. – 62711 left hand wide radius turnout – 62712 right hand wide radius turnout.