Roco 42615 Turntable

22m Turntable with electric underfloor drive and control unit

Suitable for all NEM-compatible two-wire direct current and three-wire alternating current paths. Bridge length 253 mm.

The minimum angle between two tracks is 9 degrees. The turntable is provided with patches with divisions of 1 °, 3 °, 6 ° and 9 °. This means that any division between the track outlets is possible in increments of 1 ° from 9 ° upwards.

A maximum of 40 tracks can be used. The turntable set includes four tracks for 2rail operation.

If the turntable is to be used on a 3rail AC layout, the dealer replaces the enclosed original packaging 2L = track outlets with a pack of 3L ~ track outlets (42617, contents: three 3L ~ track outlets).

The stage drive operates with a supply voltage of 14 V ~. Depending on the system used, the drive voltage is supplied with direct or alternating current. The turntable is equipped with a control unit with which the direction of rotation is preselected and the rotary movement is started.

If the turntable switch is released, the turntable stops exactly at the next track exit. Technically, the turntable is prepared for a preselection control, which allows direct selection of the desired track exit. As in the case of the ROCO model, two rotational speeds can be preselected. The traction current is fed into the rotary platform. The drive voltage supply for the track outlets can be assigned via the control unit. This prevents the two locomotives, if any, from being driven off unintentionally.

A 1 m five – pole cable (transformer control unit) and a 2 m eight – pole cable (control unit – turntable) are included.

Installation dimensions: Required opening: 280 mm; Depth of installation measured from table top edge: 50 mm; Outside diameter of the turntable without track outlets: 307 mm.

Bridge length: 253 mm, suitable for all locomotives up to a total axle position of 250 mm.