Ελληνικά
ESU 56899 Loksound micro 8pin, MM/DCC/SX
100,00 €
LokSound micro V4.0, with 8-pin NEM652 connector
Out of stock
Description
LokSound micro V4.0 «Universal sound – ready for programming», with 8-pin NEM652 connector.
| Modes: | NMRA/DCC with 14, 28, 128 drive steps and automatic detection. |
| DCC 2-digit & 4-digit addresses. | |
| Digital Motorola® (old and new), up to 28 drivesteps in Motorola®-mode. Up to 255 addresses in Motorola®-mode. 2nd address for function keys F5 to F8. | |
| Selectrix® operation with 31 drive steps. Extended functions for up to 8 function keys (suitable control station necessary). | |
| Analogue DC operation (deactivation possible). | |
| Automatic recognition of the operating mode and the DCC drive step configuration. | |
| Supporting Lenz® LG100, Märklin®, Roco® braking modes. Supporting Lenz ABC brakes and Märklin® brake mode | |
| Reverse bit | |
| Intelligent programming mode with Märklin® 6021®. Suppoting programming modes for ROCO Lokmaus 2 and ROCO Multimouse. | |
| Connection to DC-motors with permanent magnet. | |
| Noiseless, motor saving control with 40 / 20 kHz pwm frequency | |
| Motor output protected against overload. Load control of the 5th generation (possible to deactovate) Dynamic Drive Control. | |
| Function outputs: | 4 amplified outputs |
| max. 150mA load for each output | |
| Total current for all function outputs ca. 280mA. Outputs short circuit protected. | |
| Free individual function mapping. Function keys F0 to F28 | |
| 2 logic outputs. Serial protocol for C-Sinus and light control (Next18 interface). | |
| Sound unit: | 8 (!) individual sound channels |
| High power amplification with about 1.8 Watts | |
| Soundfiles in the internal flash memory modifiable | |
| Modes for Steam-, Dieselhydraulic- , Dieselelectric- , Electric locomotives, battery railcars, hybrid locomotives and so on | |
| 32 MBit sound memory (up to 276 seconds) | |
| Energy buffering: | Connecting for ESU PowerPack available |
| Communication: | Full RailComPlus® integration |
| Loudspeakers: | Impedance 4-8 Ohms, 4 Ohms recommended. Special speaker 4 Ohms, 16x25mm diameter (with sound chamber) included in delivery |
| Dimensions: | 25.0mm x 10.6mm x 3.8mm |
We can deliver the decoder ready programmed with specific locomotive sound and data at an extra cost of €20. Please contact us by email at info@erail.gr for the necessary information.