MTB MP5 – Slow action point motor with built in Double switch

• Motor switch with silent and slow motion
• Small dimensions 28x40mm (w x l)
• Inbuilt motor with rotating transmission
• Direct replace of electromagnetic motor switch with three wire connection.
• Direct connection to digital accessory decoders is also possible.
• Easy set position of rod

The motor switch is used for electric operation of the two-position mechanisms in models, such as turnout points or mechanical signals and barriers. The travel distance can be set in 3 mm,6mm and 9mm.

Both DC and AC power supplies are suitable, with a current consumption aprox 150 mA during motion. The mechanism has a end of travel detection switch, i.e. the control voltage can be applied permanently, to be disconnected automatically once a respective position is reached and the motion stops. For accessory and frog control purposes, there are 2x 1-amp switch SPDT contact with ressetable thermal protection fuse set to 0.5A short-circuit protection on the point frog.

DCC operation through Digikeijs accessory decoder 4018: https://www.youtube.com/watch?v=PqFjAi5Tr-A&t=498s&ab_channel=Rule1ModelRailways

English Manual download: https://www.mtb-model.com/files/produkty/MP1-setup_CZ_EN_DE.pdf