Operational modes
\nThe LokPilot Fx V4.0 is multi-protocol decoder meaning it speaks all common data formats such as DCC, Motorola\u00ae and Selectix\u00ae. In DCC mode 14-128 speed steps are possible, as well as 2- and 4-digit addresses. You can activate up to 28 functions. Thanks to RailComPlus\u00ae, the decoders will be automatically recognised by a suitable command station (e.g. ECoS). It is able to control all DCC programming modes und thus can be driven and programmed by all DCC-compatible digital command stations. CV values can be read out on the main track with corresponding command stations, thanks to RailCom\u00ae. There are indexed CVs for command stations which are only able to program CVs from 1-255 (e.g. ROCO\u00ae Multimaus). Motorola\u00ae users benefit from up to 28 speed steps with 255 addresses. Three further Motorola\u00ae addresses allow the activation of 16 functions. The installed programming mode makes re-programming with the venerable Control Unit\u00ae 6021 also possible. The LokPilot Fx V4.0 decoder auto-detects the known M\u00e4rklin\u00ae braking sectors as well as the ZIMO\u00ae HLU braking commands or the Lenz\u00ae ABC system. Braking with DCC brake generators or with DC (\u201cBrake on DC\u201d) is supported. Furthermore you will be able to stop your train by using the Selectrix\u00ae braking diode. Although this decoder has no motor it is, however, important for the functional decoder as well as the car decoder that they recognise the entrance of a brake section. The LokPilot Fx 4.0 decoder can be used for both analogue DC or AC locomotives. The decoder automatically switches between the different operating modes \u201con-the-fly\u201d. In most cases one does not have to adjust anything.
\nInteraction
\nThe LokPilot Fx V4.0 can also be operated with a LokSound V4.0 and a LokPilot V4.0 decoder: Therefore it\u00b4s possible to e.g. install a LokSound V4.0 decoder into the loco of a trainset and equip the control car with a LokPilot Fx V4.0. Provided they have the same address, the decoders will act absolutely identical. The identical CV arrangement makes the synchronisation of both decoders easier.
\nFunctions
\nThe LokPilot Fx V4.0 decoder has 6 function outputs. The wire harness version is usually amplified. For the 21MTC version you can select between an amplified or a logic level for AUX3 and AUX4. All important light functions are available. The brightness of each output can be adjusted separately.
\nProtection
\nOf course, all function outputs and the motor current output are overload protected. We want you to have fun with your decoder as long as possible!<\/p>\n
Dimensions 17,5×15,5×5,5mm<\/p>\n","protected":false},"excerpt":{"rendered":"
ESU 54620 – V4.0, function decoder MM\/DCC\/SX, 8-pin plug NEM652, cable<\/p>\n","protected":false},"featured_media":57281,"template":"","meta":{"_acf_changed":false},"product_brand":[952],"product_cat":[789],"product_tag":[],"class_list":{"0":"post-57279","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_brand-esu","7":"product_cat-locomotive-decoders-accessories","9":"first","10":"outofstock","11":"purchasable","12":"product-type-simple"},"acf":[],"yoast_head":"\n