LokPilot micro V4.0, DCC, 6-pin NEM 651 direct connection
Operation modes: |
NMRA/DCC with 14, 28 and 128 speed steps |
DCC 2-digit and 4-digit addresses (long and short) |
|
Analog DC (de-selectable) |
|
Automatic recognition of operational mode and DCC speed step selection. |
|
Supports Lenz® LG100, Märklin®, Roco® braking sections, Lenz®ABC brake mode |
|
Wrong-direction bit / stores operational status |
|
Switching speed- and acceleration / deceleration key selectable |
|
Throttle: |
0.75 A continuous load |
Runs DC and coreless motors |
|
Silent, safe 20 / 40 kHz pulse width frequency motor regulation |
|
Motor terminal overload protected. Fifth generation load back EMF (de-selectable) |
|
Function outputs: |
2 outputs; 150mA load per output |
approx. 280mA total load of all function outputs. Outputs short circuit protected |
|
2 logic outputs; Connection for »PowerPack« |
|
Free function allocation (function mapping) |
|
Dimensions: |
10.5mm x 8.1mm x 2.8mm (Next18: 15.0mm x 9.5mm x 2.8mm) |